Want to build a Polymer80 Glock®-compatible pistol? You'll need the Polymer80 PF940SC Jig Kit, made for the PF940SC 80% Frame. You'll need this jig to cut and drill your 80% frame blank, making it ready for assembly with a GLOCK 26 or G27 Build Kit.
Polymer80 designed the PF940SC jig kit to be easy to use. It requires only basic tools and approximately one hour of your time to fabricate your frame. The jig is made from a tough fiber-nylon composite, which allows you to use it to complete up to three frames.
The Polymer80 PF940SC Jig includes:
- (1) two-sided jig
- (1) 3mm drill bit
- (1) 4mm drill bit
You'll Need These Tools, Too
The Polymer80 Frame Jig includes the bits required for drilling your parts kit's pin holes. However, you will need basic hand tools (sold separately) to finish the slide section of the frame, before you can install your barrel, slide, and other parts.
- Vise (sold here)
- Tabletop drill press
- Dremel bit #9904
- Bubble level
- Half-round file
- Flat file
"Does this jig work with other 80% frames?"
No. The PF940SC Jig only works with the Polymer80 PF940SC 80% frame. Due to physical diferences in size, other P80 frames are not compatible with this jig. We sell all the other jigs designed for Polymer80's other frame blanks:
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
GunBuilders.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
